2012 Subaru Wont Start Common Problems And Solutions
A 2012 Subaru that won’t start is a frustrating but common problem. Most causes are simple, like a dead battery, faulty starter, or fuel pump issue. This guide walks you through every reason your 2012 Subaru won’t start and gives you clear, step-by-step solutions to fix it yourself or know when to call a pro.
There’s nothing worse than turning the key and hearing nothing but silence. If your 2012 Subaru won’t start, you’re not alone. This model has some known quirks that can leave you stranded. The good news? Most of these problems have simple fixes. Whether it’s a dead battery or a stubborn starter motor, we’ll help you figure out what’s going on. By the end of this guide, you’ll know exactly what to check and how to fix it.
We’ve put together everything you need to know about 2012 Subaru won’t start issues. From battery problems to fuel system failures, we cover it all. This article gives you real, practical advice you can use right away. No guesswork. No fluff. Just clear solutions to get you back on the road.
Key Takeaways
- Dead Battery Is the #1 Culprit: Most no-start problems in the 2012 Subaru come from a weak or dead battery.
- Starter Motor Failure Is Common: A worn starter solenoid or motor prevents your engine from cranking.
- Fuel Pump Issues Can Shut You Down: A failing fuel pump means your engine gets no gas.
- Ignition Switch Problems Are Sneaky: A worn ignition switch can mimic other starting issues.
- You Can Diagnose Many Problems at Home: Simple tests with a multimeter or a quick listen can save you time and money.
- Know When to Call a Mechanic: Some issues need professional tools and expertise.
📑 Table of Contents
- Why Your 2012 Subaru Won’t Start
- Dead Battery: The Most Common Cause
- Starter Motor and Solenoid Problems
- Fuel Pump and Fuel System Issues
- Ignition Switch and Key Fob Problems
- Other Common Reasons Your 2012 Subaru Won’t Start
- When to See a Mechanic
- Maintenance Tips to Prevent Future Starting Problems
- Final Thoughts on Fixing Your 2012 Subaru Won’t Start
Why Your 2012 Subaru Won’t Start
Before you start replacing parts, you need to understand what’s happening. When your Subaru doesn’t start, it usually falls into one of three categories. It either makes no sound at all, it clicks but won’t turn over, or the engine cranks but won’t fire up. Each symptom points to a different cause.
The 2012 Subaru model year uses a reliable boxer engine, but like any car, it has vulnerable parts. The electrical system, fuel delivery system, and ignition system all work together to start your engine. If one part fails, the whole process stops. Let’s break down each system and the most common problems.
No Sound at All
If you turn the key and hear nothing, the problem is almost always electrical. This could mean a dead battery, a bad ignition switch, or a faulty connection. Sometimes the key fob battery is too weak to send the signal to the immobilizer system. In newer Subarus, the car won’t start if it doesn’t recognize the key.
Before you panic, try holding the key fob directly against the start button. Some owners have found that this bypasses a weak fob battery. If that doesn’t work, move on to the next section.
Clicking Sound but No Crank
A rapid clicking sound usually means your battery has enough power to engage the starter, but not enough to turn the engine. This is a classic sign of a low battery charge. A single loud click often points to a bad starter solenoid or a grounded wire.
If you’ve tried jump-starting and it still clicks, the starter motor itself may be worn out. Starter motor replacement is one of the most common repairs for the 2012 Subaru. It’s not the cheapest fix, but it’s straightforward for a mechanic.
Engine Cranks But Won’t Start
This is the trickiest category. The engine turns over, but it just won’t fire. In this case, your battery and starter are working fine. The problem lies in fuel delivery or spark. A clogged fuel filter, a failing fuel pump, or worn spark plugs can all cause this issue.
If you suspect a fuel problem, listen for a faint hum when you turn the key to the “on” position. Your fuel pump should buzz for two to three seconds. No sound? Your fuel pump might be dead. Want to learn more about diagnosing car starting issues? Check out our guide on how to start a car without key safe methods and expert tips for additional diagnostic ideas.
Dead Battery: The Most Common Cause
A dead battery is the number one reason any car won’t start, and the 2012 Subaru is no exception. Batteries last three to five years on average. If your Subaru is older than that, your battery might be on its way out. Cold weather makes battery problems worse because it slows down the chemical reaction inside the battery.
How to Test Your Battery
You don’t need to be a mechanic to test your battery. Grab a multimeter from any auto parts store. Set it to measure DC voltage and touch the probes to the battery terminals. A healthy battery reads 12.6 volts or higher. Anything below 12.0 volts means your battery is weak. Below 11.5 volts and it’s basically dead.
Here’s a quick way to test without tools. Turn the key to “on” and turn on the headlights. If they’re dim, your battery isn’t holding a charge. Bright headlights mean the battery is probably fine, and the problem is elsewhere.
How to Prevent Battery Failure
- Keep your battery terminals clean: White or greenish buildup means corrosion. Clean it with a baking soda and water mixture.
- Avoid short trips: Short drives don’t give the alternator enough time to recharge the battery.
- Turn off all lights and accessories before shutting off the engine: This sounds obvious, but it happens more than you’d think.
- Replace your battery every four years: Don’t wait for it to die. Proactive replacement saves you from being stranded.
If you find yourself dealing with a dead battery often, your alternator might be failing. The alternator charges the battery while you drive. A bad alternator means the battery never gets fully recharged. Want to understand more about how car electrical systems work? Visit our page on how to start a car without key safe methods and expert tips for more electrical troubleshooting advice.
Starter Motor and Solenoid Problems
The starter motor is what actually turns your engine over when you turn the key. In the 2012 Subaru, the starter is located on the bottom of the engine. Over time, the internal brushes wear down, and the motor loses its power. A failing starter often makes a grinding or whirring noise when you try to start the car.
Signs of a Bad Starter
- Intermittent starting: The car starts some days and not others. This is an early warning sign.
- Grinding noise: The starter gear isn’t engaging properly with the flywheel.
- No response at all: You hear nothing when you turn the key.
- Dashboard lights come on but the engine doesn’t crank: This suggests the starter isn’t receiving power.
Testing the Starter
You can test the starter with a simple method called a “tap test.” Have someone turn the key to the start position while you gently tap the starter motor with a wrench. If the car starts, your starter brushes are worn and need replacement. This is a temporary fix, but it confirms the problem.
Replacing the starter on a 2012 Subaru typically costs between $300 and $500 at a repair shop. The part itself runs $150 to $250, and labor takes about one to two hours. If you’re handy, you can save money by doing it yourself.
Fuel Pump and Fuel System Issues
Your 2012 Subaru needs fuel to run. The fuel pump sends gas from the tank to the engine under high pressure. When the fuel pump fails, the engine gets starved for fuel and won’t start. This is a common problem in older Subarus, especially those with higher mileage.
Symptoms of a Failing Fuel Pump
- Engine stalls under load: The car dies when you accelerate or drive uphill.
- Hesitation or surging: The engine sputters at higher speeds.
- No-start condition: The engine cranks but won’t fire.
- Whining noise from the rear of the car: A worn fuel pump makes a loud whine.
How to Check the Fuel Pump
Turn the key to the “on” position without starting the engine. Listen near the rear of the car, where the fuel tank sits. You should hear a soft humming sound for a couple of seconds. No sound? The fuel pump relay or the pump itself could be bad.
You can also check the fuel pressure with a gauge. A healthy 2012 Subaru fuel system should read between 35 and 45 PSI. If the pressure is low, the pump isn’t doing its job. Replacing a fuel pump costs between $400 and $700, depending on whether you go with OEM or aftermarket parts.
| Symptom | Likely Cause | Repair Cost |
|---|---|---|
| No sound from fuel pump area | Dead fuel pump or bad relay | $200 – $700 |
| Engine cranks but won’t fire | Low fuel pressure | $400 – $700 |
| Car stalls under acceleration | Weak fuel pump | $400 – $600 |
| Whining noise from rear | Worn fuel pump motor | $500 – $700 |
Want to learn about other car starting problems? Our article on how to start a car without key safe methods and expert tips covers additional fuel system diagnostics you can try at home.
Ignition Switch and Key Fob Problems
The ignition switch is the bridge between your key (or key fob) and the car’s electrical system. When you turn the key or press the start button, the ignition switch sends a signal to engage the starter and power the engine control module. A worn ignition switch disrupts this process.
How the Immobilizer System Works
The 2012 Subaru uses a transponder-based immobilizer system. Your key fob contains a chip that communicates with the car’s computer. If the computer doesn’t recognize the chip, it won’t allow the engine to start. This is a security feature, but it can cause headaches when the key fob battery dies or the chip malfunctions.
Common Ignition Switch Symptoms
- Key won’t turn in the ignition: The lock cylinder may be jammed or worn.
- Accessories work but the engine won’t start: The ignition switch isn’t sending the start signal.
- Intermittent starting: The switch works sometimes but not others.
- Dashboard warning lights flicker: This suggests an electrical issue with the switch.
Replacing an ignition switch on a 2012 Subaru costs between $150 and $300. The part is relatively inexpensive, but labor can vary depending on the model trim and whether the switch is integrated with the lock cylinder.
Other Common Reasons Your 2012 Subaru Won’t Start
Beyond the big three causes, several other issues can prevent your Subaru from starting. These are less common but worth checking if the main suspects check out fine.
Clogged Fuel Filter
The fuel filter catches impurities before they reach the engine. Over time, it gets clogged and restricts fuel flow. A clogged filter causes the same symptoms as a weak fuel pump. Most manufacturers recommend replacing the fuel filter every 30,000 to 60,000 miles. If it’s been a while since your last change, this is an easy and cheap fix.
Faulty Spark Plugs
Spark plugs create the spark that ignites the fuel-air mixture in the engine. Worn spark plugs produce a weak or inconsistent spark. The engine cranks but can’t catch. Subaru recommends replacing spark plugs every 30,000 to 60,000 miles depending on the type. If you haven’t changed yours recently, this could be your answer.
Bad Ground Wire
The ground wire connects the electrical system to the car’s chassis. A corroded or loose ground wire can cause all sorts of electrical gremlins. This is one of those “hidden” problems that mechanics sometimes overlook. A quick visual inspection of the ground cables can save you hours of diagnostic frustration.
Security System Lockout
Sometimes the Subaru’s security system locks the engine after detecting an unauthorized key or a system glitch. This can happen after a battery replacement or after the battery dies completely. To reset the system, try locking and unlocking the doors with the remote, then wait 10 minutes before trying to start again.
When to See a Mechanic
Not every problem is a DIY fix. Here are situations where you should call a professional:
- Electrical issues you can’t diagnose: If you’ve checked the battery, starter, and fuel pump and still can’t find the problem, a mechanic has specialized diagnostic tools that can pinpoint the issue.
- Repeated no-start incidents: If your car won’t start more than twice in a week, there’s an underlying problem that needs attention.
- Check engine light is on: A check engine light combined with a no-start condition could indicate a serious sensor or emissions problem.
- You smell gas or notice fluid leaks: Fuel leaks near the engine or exhaust are dangerous and need immediate attention.
A good mechanic will use a diagnostic scanner to read trouble codes from your car’s computer. These codes tell you exactly which system is failing. Many auto parts stores offer free code reading, so you can get a head start before visiting the shop.
Maintenance Tips to Prevent Future Starting Problems
The best way to deal with a 2012 Subaru won’t start situation is to prevent it from happening in the first place. Regular maintenance keeps all systems running smoothly and extends the life of your car.
Create a Simple Maintenance Schedule
- Check the battery every six months: Look for corrosion on terminals and test voltage with a multimeter.
- Replace spark plugs on schedule: Don’t wait for symptoms. Proactive replacement prevents misfires and hard starts.
- Change the fuel filter every 30,000 miles: Clean fuel flow is essential for reliable starting.
- Listen for unusual sounds: A new grinding or whining noise could signal a failing starter or fuel pump.
- Keep your fuel tank at least a quarter full: Running on empty strains the fuel pump and can cause it to overheat.
- Replace the key fob battery annually: A CR2032 battery costs a few dollars and prevents key-related no-start issues.
Staying on top of these simple tasks means fewer surprises and more reliable starts. Your 2012 Subaru was built to last, but it needs basic care to perform its best.
Final Thoughts on Fixing Your 2012 Subaru Won’t Start
A 2012 Subaru won’t start problem doesn’t have to be a nightmare. Most causes are diagnosable and fixable with basic tools and a little patience. Start with the simplest explanation: the battery. If the battery is fine, move to the starter and fuel system. By process of elimination, you’ll find the culprit.
Remember that some problems need professional help, and that’s okay. Knowing what to check and what to expect at the shop saves you money and prevents unnecessary repairs. Keep this guide bookmarked for reference, and share it with fellow Subaru owners who might be dealing with the same issue.
Your 2012 Subaru is a solid, reliable vehicle. With the right care and attention, it will keep starting strong for years to come. Don’t let a no-start situation ruin your day. Use the tips in this article, stay calm, and work through the problem step by step.
Frequently Asked Questions
Why does my 2012 Subaru click but not start?
A rapid clicking sound usually means your battery is too weak to power the starter motor. Try jump-starting the car first. If it still clicks, the starter solenoid or starter motor itself may be failing and needs inspection.
How much does it cost to fix a 2012 Subaru that won’t start?
Costs vary widely depending on the cause. A dead battery replacement runs $100 to $200. A starter motor replacement costs $300 to $500. A fuel pump replacement can range from $400 to $700. Always get a proper diagnosis before committing to repairs.
Can a bad key fob prevent my 2012 Subaru from starting?
Yes. The 2012 Subaru uses a transponder-based immobilizer system. If the key fob battery is dead or the chip is damaged, the car won’t recognize the key and won’t start. Try replacing the fob battery first, and hold the fob directly against the start button as a workaround.
What should I do if my Subaru cranks but won’t fire up?
This usually points to a fuel or ignition problem. Check if the fuel pump hums when you turn the key to “on.” Inspect the spark plugs for wear. If you can’t find the issue, a mechanic with a diagnostic scanner can read trouble codes and pinpoint the problem.
How do I know if my 2012 Subaru battery needs replacing?
Test the battery voltage with a multimeter. A reading below 12.0 volts means the battery is weak. If your car is three to five years old and showing slow cranking or dim lights, it’s time for a new battery.
Is it safe to keep trying to start my car if it won’t turn over?
No. Repeated attempts can drain the battery further or flood the engine with fuel. Wait at least 30 seconds between each attempt. If the car doesn’t start after three tries, check the battery and starter before trying again.
=== CONCLUSION ===
A 2012 Subaru won’t start is a problem with clear solutions. Most of the time, it comes down to the battery, the starter, or the fuel system. By following the diagnostic steps in this guide, you can narrow down the cause and apply the right fix. Whether you handle it yourself or visit a mechanic, you now have the knowledge to tackle the problem with confidence. Keep your Subaru well-maintained, and it will reward you with reliable starts every single time.
